The NEA Framework for Irradiation Experiments (FIDES) supports the fuel and material experimental needs of nuclear safety regulators, technical support organisations, research institutions and indust...

Under an agreement with the Japan Atomic Energy Research Institute, (JAERI), the NEA supported an international research project with the goal of developing a plant safety monitoring and assessment s...

The Preparatory Study on Analysis of Fuel Debris (PreADES) project was proposed as a near-term project by the Senior Expert Group on Safety Research Opportunities Post-Fukushima (SAREF).

PreADES was ...

The Component Operational Experience, Degradation and Ageing Programme (CODAP) combines the follow-up of two previous NEA projects: the Pipe Failure Data Exchange Project (OPDE) and the stress corros...

Image: QUENCH facility at KIT. Court. KIT. 

The purpose of the QUENCH-ATF project is to investigate the chemical, mechanical and thermal-hydraulics behaviour of ATF claddings in Design Basis Accident...

The experimental investigations carried out in the frame of the THAI (2007-2009) and THAI-2 (2011-2014) projects contributed significantly to improve the understanding of hydrogen and fission-product...

^{View of the ATLAS experimental loop. KAERI, Korea}

The Advanced Thermal-hydraulic Test Loop for Accident Simulation (ATLAS) Project was referenced in The Fukushima Daiichi Nuclear Power Plant Accident...

The TAF-ID public version contains only data already published in open literature. Currently, the following systems are available in the public version:

• oxide-carbide fuel (U-Pu-O-C, released Decemb...

The Halden Reactor Project has been in operation since 1958 and is the oldest NEA joint project. It brings together an important international technical network in the area of nuclear safety ranging ...

The Experimental Thermal Hydraulics for Analysis, Research and Innovations in Nuclear Safety (ETHARINUS) project serves the objectives of investigating phenomena where the knowledge base for safety a...