The Cabri International Project (CIP) began in March 2000 to study the behaviour of fuel rods, specifically cladding, during a reactivity-initiated accident (RIA) in a pressurised-water reactor (PWR)...

Software-based systems are used and retrofitted in operating nuclear power plants worldwide. The failure modes of both hardware and software in these systems are to some extent different from the ana...

The Loss-of-fluid Test (LOFT) Research Programme was originally set up by the US Nuclear Regulatory Commission. Part of the programme was later broadened into an international collaboration project u...

The SESAR Thermal-hydraulics (SETH) Project began in 2001 and consisted of thermal-hydraulic experiments in support of accident management, which were carried out at facilities identified by the Comm...

On 28 March 1979, a partial meltdown of the Three Mile Island unit 2 (TMI-2) reactor occurred at the TMI nuclear power plant near Harrisburg, Pennsylvania, United States.

A TMI accident evaluation pr...

The HEAF Project was planned as a three-year programme to be conducted by the United States Nuclear Regulatory Commission (NRC) at a facility in the US. The project's aim was to conduct experiments i...

The Information System on Occupational Exposure (ISOE) Project provides a forum for radiological protection (RP) professionals from nuclear electricity utilities and national regulatory authorities w...

The TCOFF project provides a framework for the exchange of technical information on topics related to thermodynamic databases available for modelling the fuel/core degradation process, which include ...

Sorption is a combination of physical and chemical processes by which the migration of radionuclides in the geosphere (and possibly from a radioactive waste repository) can be slowed down under certa...

The International Co-operative Programme for the Exchange of Scientific and Technical Information Concerning Nuclear Installation Decommissioning Projects (CPD) is a joint undertaking of a limited nu...