The Benchmark for Uncertainty Analysis in Best-Estimate Modelling (UAM) for Design, Operation and Safety Analysis of Light Water Reactors (LWRs) is an international high-visibility benchmark for uncertainty analysis in best-estimate coupled code calculations for design, operation, and safety analysis of LWRs.
The annual workshops are attended by many experts in industry, research institutes, national laboratories, academia, and government agencies. Benchmark activities have the the oversight of the Expert Group on Uncertainty Analysis in Modelling (EGUAM), which reports to the Working Party on Scientific issues of Reactor Systems (WPRS) at the Nuclear Science Committee (NSC), OECD/NEA. Since it addresses multiscale/multi-physics aspects of uncertainty analysis, it works in close co-ordination with the benchmark groups on coupled neutronics/thermal-hydraulics simulations and on coupled core-plant problems. The Expert Group also coordinates its activities with the Working Group on Analysis and Management of Accidents (WGAMA) of the Committee on the Safety of Nuclear Installations (CSNI). The Expert Group provides advice to the WPRS and the nuclear community on the scientific development needs (data and methods, validation experiments, scenario studies) of sensitivity and uncertainty methodology for modelling of different reactor systems and scenarios.
Global Sensitivity Analysis: The Primer, A. Saltelli, M. Ratto, T. Andres, F. Campolongo, J. Cariboni, D. Gatelli, M. Saisana, S. Tarantola, Wiley, 2008, ISBN 978-0-470-05997-5.
The goal of the Benchmark for Uncertainty Analysis in Best-Estimate Modelling for Design, Operation and Safety Analysis of Light Water Reactors (LWR-UAM) is to determine the uncertainty in light water reactor (LWR) systems and processes in all stages of calculations. It is estimated through a simulation process of ten exercises in three phases provided by the benchmarking framework.
To ensure reliable modelling of neutron physics within a state-of-the-art transient code, the neutron kinetics part of such a code should be based on the full-scale calculation of the space-time neutron kinetics equations without use of the diffusion approximation and spatial homogenisation.
This benchmark was a continuation of the V1000CT activities and defined a coupled code problem for further validation of thermal-hydraulics system codes for application with Russian-designed VVER-1000 reactors based on actual plant data from the Russian nuclear power plant Kalinin Unit 3 (Kalinin-3)
A number of tests with detail well documented neutronics and thermal-hydraulics measurements data have been performed at the Rostov Unit 2 (Rostov-2) nuclear power plant (NPP). The reactor type is a VVER-1000 with fuel assemblies of type TBC-2M, which enable an 18-month fuel cycle length.
The Subgroup on Uncertainty Analysis in Modelling (UAM) for Design, Operation and Safety Analysis of Sodium-cooled Fast Reactors (SFR-UAM) was formed to check the use of best-estimate codes and data.
The overall objective of the VVER-1000 Coolant Transient (V1000CT) Benchmark was to assess computer codes used in the safety analysis of water-water energetic reactor (VVER) power plants, specifically for their use in reactivity transients in VVER-1000.
The Working Group on the Analysis and Management of Accidents (WGAMA) is responsible for activities related to potential accidental situations in nuclear power plants, including the following technical areas: reactor coolant system thermal-hydraulics; design-basis accidents; pre-core melt conditions and progression of accidents and in-vessel phenomena; coolability of over-heated cores; ex-vessel corium interaction with coolant and structures; in-containment combustible gas generation, distribution and potential combustion; physical-chemical behaviour of radioactive species in the primary circuit and the containment; and source term. The activities mainly focus on existing reactors, but also have application for some advanced reactor designs. Priority setting is based on established CSNI criteria and in particular on safety significance and risk and uncertainty considerations.